Apex alarm

[anthony]

Every hour of every day my apex is sending me this alarm.. Anyone know what it means?

 

[schwaggs]

Post the programming for your alarm.

 

[anthony]

Post the programming for your alarm.

Not sure what you mean?

 

[Trizzino]

Got to the alarm configuration and see what you have it set to. Here is a snapshot of one of mine.

 

[anthony]

This is what it says. Not sure what it means.

 

[schwaggs]

You have no alarms programmed, so its not much use.

On the home screen, is the EmailAlm outlet set to "Auto"? I suspect it may be set to manual ON

 

[seand]

Upload a screenshot of the inputs page

 

[Adam]

The new Apex let's you set alarms from the input as well. Sounds like hysteresis going on with one of them.

Post up the input page and your graphs from the main page.

 

[anthony]

Yes it was set to on

 

[anthony]

Here's what I have.

 

[Adam]

Setting it to on would do that. I didn't look at the times this morning on my phone. Seeing that they were exactly hourly is another clue to that.

You should also disable the 2nd ph probe.

If you need help with anything on the Apex PM me.

 

[anthony]

Sounds great. Thanks again

 

[anthony]

Trying to figure out how to disable second ph probe

 

[camellia]

Go to control, manual control
Find correct PH probe (remove from water to check status of each)
Turn off

 

[Adam]

This is what you need to set in the inputs page.

 

[anthony]

I only have one physical ph probe. So just disable ph2?

 

[anthony]

I'm not seeing anything that says controls or manual control. Unless it's on a display which I do not have.

 

[camellia]

Anthony go to input page as displayed above and “disable” in configuration as shown by anit77, for the confusion