Ato suggestions.

[myreefclub0070]

Well the next step at is time in my build is to get the ato system up and running, but.......
This is what I had on my last system.........
A container with a small pump and a float switch in the sump to turn it on and off, this setup worked great for that system.
What I had planed to do for the new build is to have my RO filter line in the sump on a float valve and a solenoide valve with a float switch as a fail safe for the float valve.

Any thoughts on these or do you have a better setup suggestion or just different.
Pictures and or drawings welcome.

Thanks in advance

 

[northgahillbilly]

http://www.amazon.com/Madison-M8000-Miniature-Polypropylene-Pressure/dp/B00909404Y/ref=sr_1_7?ie=UTF8&qid=1422322192&sr=8-7&keywords=float+switch">Madison M8000 Plastic Full Size Miniature Liquid Level Float Switch with Polypropylene Stem, 30 VA SPST, 1/8" NPT Male, 100 psig Pressure: Electronic Component Liquid Level Sensors: Amazon.com: Industrial & Scientific@@AMEPARAM@@http://ecx.images-amazon.com/images/I/31riGlRV6AL.@@AMEPARAM@@31riGlRV6AL</a>

Those are the switches I was suggested by a guy who works with caustic chemicals in his lab

 

[dawgface]

I love the Smart ATO. Especially if your running kalk in your reservoir as it takes a snapshot of the last three fills and auto shuts off when the current exceeds the average of the others.... Could be the longest of the three I suppose. Also coins its self as failsafe due to the proprietary eye it uses to measure levels. While I can't lay verification to that, I've certainly have had zero problems with it.