- Messages
- 1,692
- Reaction score
- 53
i met a guy thats just getting into the hobby and we got to talking and he said he is starting from scratch and doesnt have anything yet. so we started talking about filtration ang got on the subject of sumps and i told him since he didnt have one if he paid for the materials id build him a sump. the only thing i didnt do was cut the acrylic since i dont have access to a table saw so i had a friend do that for me. i did the planning, i did all the silicone by hand and it turned out pretty nice, i sanded all the peices that needed it by hand and did all the solvent welding. well anyway i put a lot more work into this thing than i usually do i dont know if it was because its for someone else or what but it turned out nice and im really proud of it so i figured id show it off.
nice clean silicone lines.
http://s1263.photobucket.com/user/brijesh0789/media/9eefcc9d-c9b3-4af5-8886-60d1bb84071c_zps715eb673.jpg.html">9eefcc9d-c9b3-4af5-8886-60d1bb84071c_zps715eb673.jpg Photo by brijesh0789 | Photobucket</a>
bottom of the bubble trap aprox 3/4 inch gap
[IMG]http://s1263.photobucket.com/user/brijesh0789/media/D84D4B45-EFAB-40CE-B9AF-E6BB1DB862F6-22853-000012F2D59493C9_zps8f3f8f05.jpg.html">D84D4B45-EFAB-40CE-B9AF-E6BB1DB862F6-22853-000012F2D59493C9_zps8f3f8f05.jpg Photo by brijesh0789 | Photobucket</a>
1 nice almost bubble free solvent weld 2 3x2 inch slot for water to exit from 3 eggcrete to keep the pond matrix out of the filter sock chamber
[IMG]http://s1263.photobucket.com/user/brijesh0789/media/E773F0FE-F004-4B8B-8295-7A9F32648418-22853-000012F2C5BA0195_zps70bd1087.jpg.html">E773F0FE-F004-4B8B-8295-7A9F32648418-22853-000012F2C5BA0195_zps70bd1087.jpg Photo by brijesh0789 | Photobucket</a>
top shot of bubble trap with braces to support the main peice and keep it from bowing under the pressure of the water
[IMG]http://s1263.photobucket.com/user/brijesh0789/media/E3FE0C9F-35AD-4A73-84F4-B428EB1FAF2E-22840-000012F20C4A8019_zps36c14df8.jpg.html">E3FE0C9F-35AD-4A73-84F4-B428EB1FAF2E-22840-000012F20C4A8019_zps36c14df8.jpg Photo by brijesh0789 | Photobucket</a>
filtersock chamber
[IMG]http://s1263.photobucket.com/user/brijesh0789/media/B5AD65E2-928C-4DA6-B764-4082F8948356-22853-000012F2ABAC0405_zps6d847d97.jpg.html">B5AD65E2-928C-4DA6-B764-4082F8948356-22853-000012F2ABAC0405_zps6d847d97.jpg Photo by brijesh0789 | Photobucket</a>
filtersock tray. had to hand sand the hole for about 35-40 mins bacause the hole saw i had that was closest to the diameter of the filtersock was 1/2 inch too small and all the corners were sanded round that way they wouldnt cut into the silicone
[IMG]http://s1263.photobucket.com/user/brijesh0789/media/B5AD65E2-928C-4DA6-B764-4082F8948356-22853-000012F2ABAC0405_zps6d847d97.jpg.html">B5AD65E2-928C-4DA6-B764-4082F8948356-22853-000012F2ABAC0405_zps6d847d97.jpg Photo by brijesh0789 | Photobucket</a>
small tabs for the fs tray to sit on. the one at the top right was siliconed into place since there was no acrylic near by the rest were solvent welded to the acrylic
[IMG]http://s1263.photobucket.com/user/brijesh0789/media/4FF7F593-F1C0-4BB9-B2A3-BF13A0DCE40A-22840-000012F261EE55FE_zps55065ee3.jpg.html">4FF7F593-F1C0-4BB9-B2A3-BF13A0DCE40A-22840-000012F261EE55FE_zps55065ee3.jpg Photo by brijesh0789 | Photobucket</a>
tab made of thin acrylic to keep the fs tray in place when you just want to change filtersocks (i made the tray removable for cleaning)
[IMG]http://s1263.photobucket.com/user/brijesh0789/media/4A4D0590-9CB8-4C93-B231-96E0037E445C-22853-000012F2CD443A3A_zps8e453ef2.jpg.html">4A4D0590-9CB8-4C93-B231-96E0037E445C-22853-000012F2CD443A3A_zps8e453ef2.jpg Photo by brijesh0789 | Photobucket</a>
and the filtersock in the tray in the chamber. its too long but that shouldnt affect the performance of it.[IMG]http://s1263.photobucket.com/user/brijesh0789/media/19915FF3-CB15-46D6-B632-E611F32163BC-22840-000012F21FFD3455_zps6a7a82a2.jpg.html">19915FF3-CB15-46D6-B632-E611F32163BC-22840-000012F21FFD3455_zps6a7a82a2.jpg Photo by brijesh0789 | Photobucket</a>
while i was taking these pics i completely forget to get a full shot of the sump so ill get that up tomorrow afternoon. hope you guys enjoyed
nice clean silicone lines.
http://s1263.photobucket.com/user/brijesh0789/media/9eefcc9d-c9b3-4af5-8886-60d1bb84071c_zps715eb673.jpg.html">9eefcc9d-c9b3-4af5-8886-60d1bb84071c_zps715eb673.jpg Photo by brijesh0789 | Photobucket</a>
bottom of the bubble trap aprox 3/4 inch gap
[IMG]http://s1263.photobucket.com/user/brijesh0789/media/D84D4B45-EFAB-40CE-B9AF-E6BB1DB862F6-22853-000012F2D59493C9_zps8f3f8f05.jpg.html">D84D4B45-EFAB-40CE-B9AF-E6BB1DB862F6-22853-000012F2D59493C9_zps8f3f8f05.jpg Photo by brijesh0789 | Photobucket</a>
1 nice almost bubble free solvent weld 2 3x2 inch slot for water to exit from 3 eggcrete to keep the pond matrix out of the filter sock chamber
[IMG]http://s1263.photobucket.com/user/brijesh0789/media/E773F0FE-F004-4B8B-8295-7A9F32648418-22853-000012F2C5BA0195_zps70bd1087.jpg.html">E773F0FE-F004-4B8B-8295-7A9F32648418-22853-000012F2C5BA0195_zps70bd1087.jpg Photo by brijesh0789 | Photobucket</a>
top shot of bubble trap with braces to support the main peice and keep it from bowing under the pressure of the water
[IMG]http://s1263.photobucket.com/user/brijesh0789/media/E3FE0C9F-35AD-4A73-84F4-B428EB1FAF2E-22840-000012F20C4A8019_zps36c14df8.jpg.html">E3FE0C9F-35AD-4A73-84F4-B428EB1FAF2E-22840-000012F20C4A8019_zps36c14df8.jpg Photo by brijesh0789 | Photobucket</a>
filtersock chamber
[IMG]http://s1263.photobucket.com/user/brijesh0789/media/B5AD65E2-928C-4DA6-B764-4082F8948356-22853-000012F2ABAC0405_zps6d847d97.jpg.html">B5AD65E2-928C-4DA6-B764-4082F8948356-22853-000012F2ABAC0405_zps6d847d97.jpg Photo by brijesh0789 | Photobucket</a>
filtersock tray. had to hand sand the hole for about 35-40 mins bacause the hole saw i had that was closest to the diameter of the filtersock was 1/2 inch too small and all the corners were sanded round that way they wouldnt cut into the silicone
[IMG]http://s1263.photobucket.com/user/brijesh0789/media/B5AD65E2-928C-4DA6-B764-4082F8948356-22853-000012F2ABAC0405_zps6d847d97.jpg.html">B5AD65E2-928C-4DA6-B764-4082F8948356-22853-000012F2ABAC0405_zps6d847d97.jpg Photo by brijesh0789 | Photobucket</a>
small tabs for the fs tray to sit on. the one at the top right was siliconed into place since there was no acrylic near by the rest were solvent welded to the acrylic
[IMG]http://s1263.photobucket.com/user/brijesh0789/media/4FF7F593-F1C0-4BB9-B2A3-BF13A0DCE40A-22840-000012F261EE55FE_zps55065ee3.jpg.html">4FF7F593-F1C0-4BB9-B2A3-BF13A0DCE40A-22840-000012F261EE55FE_zps55065ee3.jpg Photo by brijesh0789 | Photobucket</a>
tab made of thin acrylic to keep the fs tray in place when you just want to change filtersocks (i made the tray removable for cleaning)
[IMG]http://s1263.photobucket.com/user/brijesh0789/media/4A4D0590-9CB8-4C93-B231-96E0037E445C-22853-000012F2CD443A3A_zps8e453ef2.jpg.html">4A4D0590-9CB8-4C93-B231-96E0037E445C-22853-000012F2CD443A3A_zps8e453ef2.jpg Photo by brijesh0789 | Photobucket</a>
and the filtersock in the tray in the chamber. its too long but that shouldnt affect the performance of it.[IMG]http://s1263.photobucket.com/user/brijesh0789/media/19915FF3-CB15-46D6-B632-E611F32163BC-22840-000012F21FFD3455_zps6a7a82a2.jpg.html">19915FF3-CB15-46D6-B632-E611F32163BC-22840-000012F21FFD3455_zps6a7a82a2.jpg Photo by brijesh0789 | Photobucket</a>
while i was taking these pics i completely forget to get a full shot of the sump so ill get that up tomorrow afternoon. hope you guys enjoyed