Setting up dosing pumps

[crew]

Well - this post isn't really about setting them up. Doing that was easy. My main question is how have you mounted your BRS dosing pumps? I have them sitting on top of a section of my sump and it's really not ideal because I have to move them to get into that portion of my sump. I've noticed some sort of bracket on the back, but instead of spending an hour at home depot, I figured I would just post here. How have you guys done it?

These are the pumps I have.

 

[nickh06]

I have mine mounted in the top of my stand off to the side. Used the mounting brackets they came with. Working well so far, thought about mounting in the back or outside the stand as well but I have plenty of room underneath.

 

[crew]

mine didn't come with mounting brackets? hmmm.. I'll have to talk to BRS

 

[nickh06]

Crew;1037229 wrote: mine didn't come with mounting brackets? hmmm.. I'll have to talk to BRS

is this the one you have? http://www.bulkreefsupply.com/brs-2-part-doser-1-1-ml-per-minute.html">http://www.bulkreefsupply.com/brs-2-part-doser-1-1-ml-per-minute.html</a>

Should have a plastic clip on the back that slides off, mine came with two screws to mount the clip then you just slide the doser on.

Do you have them programmed with an apex or a timer? Just an fyi, if you are using an apex you have to use outlet numbers 4&8 on an EB8. The other outlets wont turn the pumps off

 

[crew]

That's the one, and it has an area on the back that I could see a clip sliding into, but I have no clip.

 

[hiimsean]

There should have been a clip and some screws to mount it. Call BRS they'll help you out.

 

[fishlips]

This is mine.Made it myself.