Any hints/tips/pics of LED mounting fixtures???

[sra_chipmunk]

Im doing my own LED setup. i have a 60 cube (24x24x24) and the heat sinks are 7.280"x14". I need a setup to hand these from as I will not have a hood to go over the tank. I saw these on Marine Depot
http://www.marinedepot.com/Current_USA%60s_Hanging_Arm_System_for_Outer_Orbit_SunDial_HQI_Nova_Extreme_Pro_SunPod_Fixtures._Hanging_Kits_for_Aquarium_Light_Fixtures-Current_USA-CU01092-FILTACMOFTHK-vi.html">http://www.marinedepot.com/Current_U...MOFTHK-vi.html</a>
[IMG]http://www.marinedepot.com/AquaticLife_Stand_Light_Fixture_Hanger_Hanging_Kits_for_Aquarium_Light_Fixtures-AquaticLife-AK01209-FILTACMOFTHK-vi.html">http://www.marinedepot.com/AquaticLi...MOFTHK-vi.html</a>

These only incorperate one light fixture but I am sure I could rig it to hold 2 heatsinks. I would just like to see what some of you guys are doing for mounting fixtures for your LED setups. Any tips, suggestions or pics of your setups would be very much appreciated.

thanks
Tom

 

[sts04c]

Tom,

I have the conduit (1/2"), bent at 90 degrees and painted flat black already. They did not fit on my current setup, but (will on the next). If you want them and the fasteners, $25 (what I paid) and they are yours or you can go to Home depot by a couple pieces of conduit and have them bend it in store, paint it, and you are there. I hope this helps.

Also looking forward to seeing some pics of these, I am planning my own DIY LEDs currently.

 

[sra_chipmunk]

Can you post some pics please

 

[sts04c]

It is the poles in the links. Black, 1/2 inch, round instead of square, no hanging kit. No pics sorry.

 

[sra_chipmunk]

Do you have the dimensions of it? How far does the pole extend after the 90* bend?

Im sure shipping is going to be a killer on this. I may just have to go to Home Depot or Lowes myself and check this out.