I wasn’t sure where to put this so I’ll try here. This is to an 18w deep blue Uv sterilizer , I think it’s owned by aquarium masters now, the plug/ballast has stopped working. I have put in the model number the company number, emailed the company and can seem to find one. Even the vendor that supplies the place I bought it can’t find one. So here are the pics if any one has any thought I would love them. I have done so many searches they all look the same. Some are close but not the correct watts or amps. It also has a plug that is difference than most. I can always cut the wire and splice them to the plug if I find the correct plug/ballast Thanks in advance.
Can’t find any kind of replacement
- Thread starter larrynews
- Start date
Any 18 W PL ballast should work. You can go higher on the amps just don't go lower than .35
This may work. Is it a 4 pin bulb?
As mentioned, check amperage to be sure.
www.cureuv.com
As mentioned, check amperage to be sure.
Electronic Ballast Guaranteed to Work with TUV PL-L 18W/4P Compatible
Ballast guaranteed to work with your TUV PL-L 18W/4P Compatible UV Light Bulb for Germicidal Air/Water Treatment along with necessary wiring instructions to set it up properly. If even new bulbs are failing in your system or flickering significantly, it is likely time to replace your electronic...
www.cureuv.com
