First attempt that HNSA aquascape

This is what mine looked like before I filled it up.
 

Attachments

  • 6AB6A475-09AE-467D-9783-B3CB6C11D196.jpeg
    6AB6A475-09AE-467D-9783-B3CB6C11D196.jpeg
    158.5 KB · Views: 33
  • 387977AE-0735-49EF-9B5F-9300A27BF7F5.jpeg
    387977AE-0735-49EF-9B5F-9300A27BF7F5.jpeg
    248.9 KB · Views: 29
  • 820C8459-7621-4A77-8026-7717F4396504.jpeg
    820C8459-7621-4A77-8026-7717F4396504.jpeg
    279.2 KB · Views: 29
Looks really good! Here’s another example for you….
 

Attachments

  • 7F6D8E08-23F8-431C-8BFF-703D21029F13.jpeg
    7F6D8E08-23F8-431C-8BFF-703D21029F13.jpeg
    175.7 KB · Views: 12
Noice.... I got 2 more to make, but the glue I started with is done, the other two I bought from Same company says thin, but it's not, viscosity is much thicker. Super pissed right now cause it does not setup the same way, such a pain I was on a roll.
 
Mine is 6 modules. Used super glue gel for initial setup. Then coated with E Marco 400. Took approximately 4 weeks to complete.
 

Attachments

  • A33CD151-3779-400C-9F08-57BB4C32C047.jpeg
    A33CD151-3779-400C-9F08-57BB4C32C047.jpeg
    453.8 KB · Views: 8
  • 51131D84-6050-4217-B4A5-D72A80AC3A18.jpeg
    51131D84-6050-4217-B4A5-D72A80AC3A18.jpeg
    346.2 KB · Views: 8
  • 71D76E07-5612-4A00-A5D2-89ED2D4C42A0.jpeg
    71D76E07-5612-4A00-A5D2-89ED2D4C42A0.jpeg
    318.3 KB · Views: 9
  • 2A4F4E5D-2206-4B26-AC1D-5A7A30111212.jpeg
    2A4F4E5D-2206-4B26-AC1D-5A7A30111212.jpeg
    299.5 KB · Views: 10
Back
Top