Flexible PVC?

[thbrewst]

Making plans to plumb a tank into the cabinet. As a general question though, is there a reason why you should not use flexible PVC? All other things being equal it would seem to give you the easiest installation process, less chance of issues with 90 degree turns, and less rework should you need to adjust anything.

So, what are the negatives? Can you still apply various valve types? Will it break/crack over time?

Thanks.

 

[fish scales2]

There is a big difference between flexible hose and flexible pvc "spa flex". Wich one are you referring to?

Spa flex is really not that flexible, it can be a pain at times. 1" is not so bad but anything any larger is a bear.

Some people just prefer the clean look of a hard-line plumb.

Spa Flex should be glued as opposed to Flexible that requires barbed fittings and clamps.

 

[thbrewst]

I am referring to spa flex. I realize that it is not super flexible, but it does bend a little so I would 'think' that would make things easier. I have never used it before though so I did not know what I might be missing with my assumptions.

 

[fish scales2]

I think the issue is more with flexible tubing that can get kinked or stopped up a bit easier. Spa Flex is a great way to plumb drains. I also like it because I can glue fittings and use in conjunction with rigid PVC. JMO.

 

[skriz]

You can use spa flex, but you need to make sure you use the correct cement to properly bond it.

 

[silveradositn]

spa flex works great but like they said its some times hard to bend

 

[eric b]

You can leave it in the sun or some people put oven on low and place it in for a bit it makes it more flexible....Also Raj is correct you need correct glue for spa flex I think it is the blue stuff but make sure.

 

[dragoon]

Spa Flex sucks! Stick with hard pipe and use sweeping 45s and 90s to solve your issues. Way easier to work with, don't have to worry about bad welds and water damage to your house. I use it only if I absolutely have too. Meaning there is no other way to make the run, and then only use it at the point it was required and return to hard piping...