Help. Overflow / Durso Flushing

darren24

Active Member
Market
Messages
1,235
Reaction score
0
Woke me up at 4:00am. Set up a new tank yesterday. Everything seemed fine. Now the durso drain will "flush" the water from the overflow and then it refills. It repeats this every minute or two. Made the hole in the top of the drain cap a little larger. Maybe helped a little. Any suggestions? Thanks in advance.
 
That would have been my suggestion - enlarge the vent hole. I had to do it with my own too, and we've had to do it with several installed tanks.

Jenn
 
If the hole enlarging doesn't help try the following:

Is the sump end of the drain line under water? If so, try raising it up some. Air can also become trapped if this output line is sloping on the fall causing an air pocket. Are you using tubing on the drain or pvc?

Jonathan
 
Back
Top