Help Please help

william1

Active Member
Market
Messages
1,291
Reaction score
18
Im at witts end with these retro T5s. 2X660 icecaps 8T5's

So I decided to lower the T5 lights I got so there about 4" off the water. Made a nice little shelf and disconnected the endcaps, but left all the wires in the same as Im just going to extend the wires down to the new bulb position.

After doing this I mounted all the endcaps and extention wire to the new shelf hooked it all back up and only one ballast lit four lamps. The other four lamps just flicker on for a second and then shut off.

After playing with the 8 endcaps to the bulbs that are not lighting for the last 6 hrs, I decided to pull out the trusty Ohm meter and test the lines. There doesnt seem to be any problems with the lines to the bulbs and back and the jumpers seem ok as well.

I thought it might be the ballast so I disconnected the one that was working and plugged it up to the non working side and the same thing happens on then off. But it works like a champ on the other four bulbs as we speak. Two of the four bulbs dont light as bright for the split second as the other two maybe this might be something.

Im fustrated and tired and need some help. Im ready to sell the set up for some MH.
 
Heres something funny when I plug it into a different outlet works fine lol wonder what it is.
 
WILLIAM1;428339 wrote: Heres something funny when I plug it into a different outlet works fine lol wonder what it is.
:eek: wish I could help you but that goes beyond me
 
Ok all figured out now I need a nap. For some reason the ballast wasnt getting a good ground tried a different outlet walla there it was heaven shinning down on me what a feeling. I have been trying to figure it out for hrs hahaha and all I had to do was move the plug hahaha.
 
Back
Top