Help with Vectra L2

[senthilvkumar]

I have a redsea 625 XL (165 gal) tank, I swapped out the return pump on it from reefrun (2100gph) to vectra l2 (3250 gph) because I wanted everything in my system to be controllable from apex.

Now the water level is display is about a inch lower than what reefrun was able to push out . And the overflow is really noisy. The only way to get the water back to the level and get it quiet down is if I run the pump at 80%. The corals are not able to handle that much flow.

Is this a problem with vectra or did I got the wrong pump for the size?

 

[york1]

Have you tried adjusting the valve on the drain?

 

[NAS]

Adjust the main drain and retune the pump. You have to close the valve a little bit. Do a tiny bit at a time, let it sit for at least 10 mins.

 

[project1004]

You have 165 Display and saying your corals can’t handle the flow coming from your return pump? X.x. Idk….

Point your nozzle to the wall if necessary.