Sat project

[Eric_n_Ga]

Trying to get all this in this stand is a trick . Still needs a set of shelves , over flows in and return plumbing

 

[dball711]

It will be a lot of work but it looks like a fun project!

 

[Eric_n_Ga]

Moving right along

 

[Eric_n_Ga]

48 in stand , trying to configure a 30gal. Sump , a 36watt uv unit , 2 overflow inputs , a return pump , a 3 way manifold , 2 mini reactors , and other various equipment is quite the challenge.

 

[york1]

Looks like you are off to a good start

 

[kullas]

Comming right along. You will be ready in no time for water.

 

[Eric_n_Ga]

My house smells of PVC glue ..lol

 

[Eric_n_Ga]

Getting closer.

 

[Eric_n_Ga]

All plumbed and wired for now . Made some shelves for the dosing pumps , bracket for the media reactors , fuge light #1 is in . 9 unions for ease of access. 3 valves , 1 check valve , 3 port manifold . Mounted the 36watt aqua uv light to the bottom of the tank and hard lined it in ( bulb still removable ) waiting to decide on a ATO tank till I can see what my actual measurements are . 2 days of plumbing is enough ..shhhew

 

[york1]

Looks good. Nice and clean and not to crowded.

 

[Eric_n_Ga]

Looks good. Nice and clean and not to crowded.

I ran everything up high and tight , pipes and cords . That's all the pipe work. I'm going to use a colored hard airline tubing for the dosing and ato lines , and white 1/2" push for the media reactors .

All electrical will be in adjacent closet space behind the wall besides a pair of mp40 controllers that will mount above the dosing pumps