Wp-25

[jdavid]

Well I might be the first one to have mine quit working on me. Both the blue and green LEDs are blinking and the pump isn't working. Tried unplugging it and plugging it back in. Nothing about this in the manual. I set a bucket down on the cord, I guess that shorted it out maybe.

 

[porpoiseaquatics]

JDavid;886418 wrote: Well I might be the first one to have mine quit working on me. Both the blue and green LEDs are blinking and the pump isn't working. Tried unplugging it and plugging it back in. Nothing about this in the manual. I set a bucket down on the cord, I guess that shorted it out maybe.

If you get over my way, bring it with you and we'll take a look at it.

 

[jdavid]

Jeff false alarm. However I believe I discovered an error code that is not in the manual. When both lights are blinking on H1 and S1, it means there is something (in my case sand) underneath the magnet.

 

[porpoiseaquatics]

JDavid;886429 wrote: Jeff false alarm. However I believe I discovered an error code that is not in the manual. When both lights are blinking on H1 and S1, it means there is something (in my case sand) underneath the magnet.

Well that's good that you got it running. I'm sure there are plenty that didn't get put in the manual.

 

[jdavid]

Yeah I didn't think to check under the impeller magnet, (if that is what you call it you know what I mean)

Problem solved it's running fine. I appreciate the offer to help though

 

[porpoiseaquatics]

No problem. Just wanted to make sure that everybody is up and running. So far only 1 bad controller on an WP40 and one bad pump on a WP25...all-in-all, not bad.