I set up my CR today. It's a CR-6 dual chamber with spray bar. It is being controlled by an American Marine pinpoint controller. I've read the instructions for set up -- but would really appreciate input from experienced users.
I have set the HI side at 6.60 and the LO side at 6.30 -- does these settings seem reasonable? Since I've just set up the unit the pH reading is slowly dropping in the CR and is now down to about 7.02 -- it started at 8.02 and it's been about 2 hours elapsed time. The pH probe is set in a T device that measures the pH of the water within the two chambers.
Thanks for your feedback and advice. This whole process has terrified me from the start having read how easy it is to crash a tank.
-gene
I have set the HI side at 6.60 and the LO side at 6.30 -- does these settings seem reasonable? Since I've just set up the unit the pH reading is slowly dropping in the CR and is now down to about 7.02 -- it started at 8.02 and it's been about 2 hours elapsed time. The pH probe is set in a T device that measures the pH of the water within the two chambers.
Thanks for your feedback and advice. This whole process has terrified me from the start having read how easy it is to crash a tank.
-gene