Bubbles in display

[gmpolan]

Does anyone have any solution to reducing the bubbles that end up in the display tank? I have three baffles before my fuge, two before the return and LR rubble in the drain. I also just ordered a filter sock but besides that im not sure what else to do. Any input would be great...

Thanks, G

 

[darren24]

Filter sock on my drain pipe resolved my bubble issue.

 

[dakota9]

Please, try this........

People have said that I was wrong about this, but it rids me of micro-bubbles everytime I use one.

If you're not using a UV Sterilizer, try one... Everytime I use UV, the micro-bubbles disapate.

 

[skriz]

The bubbles would be a result of improper baffling in the sump. Since you probably can't do much about that now, a filter sock will be your next best option. Keep in mind that you will need to constantly remove and clean out the filter sock. It's best to keep 6-12 on hand and just swap them out and wash them in loads.

 

[spike]

A simple solution can be placing filter pad in between last two baffles, before the return pump.

 

[gmpolan]

Thanks just put in an order for some socks (6 count) and ill try that first.
I have a uv as well but it isnt tied into any of lines yet because the bulb is broken.

Skriz - the sump was actually customer built by a member on here for a tight compartment on a 72 bow so i assume it was designed that way for space issues.

 

[gmpolan]

Put a filter on the return mag and it reduced the bubbles by alot but ill comment back once i add the socks...