B bruce 1 Member Market Messages 608 Reaction score 0 Jul 17, 2012 #1 I need to run some tubing for the CO2, (18 feet). What kind of tubing should I use?
miami dolfan Member Market Messages 605 Reaction score 0 Jul 17, 2012 #2 I bought the home depot 20' roll and it works fine.
B bruce 1 Member Market Messages 608 Reaction score 0 Jul 17, 2012 #3 What kind? Vinyl leaks the CO2 out, some one told me the RODI tubing works good.
miami dolfan Member Market Messages 605 Reaction score 0 Jul 17, 2012 #4 I'm using the vinyl with no issues
J jef4y Active Member Market Messages 1,701 Reaction score 0 Jul 17, 2012 #5 Been using vinyl for years. Under pressure, I'm sure it would leak CO2 but going into the reactor there is almost no pressure.
Been using vinyl for years. Under pressure, I'm sure it would leak CO2 but going into the reactor there is almost no pressure.
S sewer urchin Well-Known Member Supporting Messages 1,127 Reaction score 20 Jul 17, 2012 #6 I've been using vinyl for years to artificially inject CO2 into my beer kegs to carbonate the beer usually 25 psi with no problems.
I've been using vinyl for years to artificially inject CO2 into my beer kegs to carbonate the beer usually 25 psi with no problems.
B bruce 1 Member Market Messages 608 Reaction score 0 Jul 17, 2012 #7 With vinyl you lose 20% to 30% of the CO2.