DIY auto top off

kullas

Well-Known Member
Market
Messages
783
Reaction score
784
Location
Ellijay
Being that I am going to be getting another tank I needed another ato. I really didn't want to pay 70 plus for another one so I looked around the house and wound up having a little less than $10 in this one.

Here is how it started20200313_185258.jpg
Here it is almost through the wiring20200313_194638.jpg

And here it is done20200313_213937.jpg
 
Being that I am going to be getting another tank I needed another ato. I really didn't want to pay 70 plus for another one so I looked around the house and wound up having a little less than $10 in this one.

Here is how it startedView attachment 20067
Here it is almost through the wiringView attachment 20068

And here it is doneView attachment 20069
Wow! Don’t think I could’ve come up with this. An electrician I’m not!!
 
This was a simple build. A cheap 6ft extension cord, 12v relay, 2 float switches, a switch, 12 v output wall wort, some wire and a box to put it in. Took about 20 min to wire. I deviated from the basic relay wiring to be able to light the light in the switch when ever the pump turns on. The manual switch is to be able to turn it off during maintenance. The 12v wall wort I took apart and wired into connections inside the box so I only had 1 thing to plug in.
 
Back
Top