Fluval Edge accumulating water in the

tony_caliente

Member
Market
Messages
842
Reaction score
0
bottom of the plastic stand (where all of the wiring slips through). Has any one had this experience? Thank you.

Tony
 
Not had that problem....

Is the HOB filter seated level within that housing? If not, a slight drip could cause water to accumulate. The filter should be level, and ever so slightly tilted forward through use of the leveling devices. I hope that is it, as that's about the only quick fix, unless you're certain you didn't accidentally drip water down there somehow.
 
off. I am checking on it frequently. Thank you for the advice.

Dakota9;751183 wrote: Not had that problem....

Is the HOB filter seated level within that housing? If not, a slight drip could cause water to accumulate. The filter should be level, and ever so slightly tilted forward through use of the leveling devices. I hope that is it, as that's about the only quick fix, unless you're certain you didn't accidentally drip water down there somehow.
 
Though of something else!

The filter pump could have come loose from the housing of the AC20 Filter. You could pull the filter up and see if that is where the water is leaking from.
 
Back
Top