fullmonti
Member
I found a glass flower vase I thought would make a really nice nano tank, a 16" bubble. I wanted a sump to hide the pump, heater, skimmer etc, but didn't want a bunch of plumbing showing in the tank. After much thought this is what I came up with.
alt="" />
Some of the details changed along the way, but the concept of having the overflow outside of the tank stayed & works.
alt="" />
alt="" />
Drilled for a 2" bulkhead.
alt="" />
alt="" />
alt="" />
alt="" />
This is what I built for the water to leave & return to the tank. Camouflaged the pvc by gluing sand & rock to it. A rock will set on top of the drain & hide it pretty well.
alt="" />
alt="" />
This is the pluming I ended up using on the bottom side of the bulkhead.
alt="" />
Temporary rig to test if the system would drain a mag 5 pump output. It did so well I even tried a mag 7 pump & that worked too.
This is probably enough for one post. Will close this one & start a new post.
Edit:
alt="" />
alt="" />
The stand/sump is a skrap of 15" pvc sewer pipe. The pipe is the stand & holds the water for the sump.

Some of the details changed along the way, but the concept of having the overflow outside of the tank stayed & works.


Drilled for a 2" bulkhead.




This is what I built for the water to leave & return to the tank. Camouflaged the pvc by gluing sand & rock to it. A rock will set on top of the drain & hide it pretty well.


This is the pluming I ended up using on the bottom side of the bulkhead.

Temporary rig to test if the system would drain a mag 5 pump output. It did so well I even tried a mag 7 pump & that worked too.
This is probably enough for one post. Will close this one & start a new post.
Edit:


The stand/sump is a skrap of 15" pvc sewer pipe. The pipe is the stand & holds the water for the sump.