led help

dabo

Member
Market
Messages
110
Reaction score
0
i have robs black box led fixture and i need a new driver. i have no idea where to get one or which one i might need. it does not have to be the factory one it came with . i just need the light to work. the unit is not dimmable. if anyone has any information to point me in the right direction.
it would be greatly appreciated.
 
yes for sure the driver . right now just the blues work , but if i switch the driver from one side to the other. then just the whites work.
 
tagging along... Similar thing happening on on of mine, except whites are on no blues (bought used from a member around 6 months ago).

Dabo- I think Rich found a source, also bruce 1.

If you find a place, would you would be interested in a group buy for a price break I could use 1 possible 2 depending on price.
 
Sorry, I never looked for a source. I had offered to help some people who had problems but no one ever took me up on it so I didn't look for them. Any driver will work that matches the data you can find on the face of the bad driver. There should be a list of information on the face of the driver. From what I have heard, meanwell makes quality drivers so I would start at their website and see what I could find that matches the info on the factory driver.

Sorry I couldn't be more help.
 
Here's the one I'm going with. I'm ordering two, in fact.
http://www.boostled.com/product_p/eln-60-48p.htm">http://www.boostled.com/product_p/eln-60-48p.htm</a>

Also may order the controller if I decide against a full Apex unit.
[IMG]http://www.boostled.com/category_s/1833.htm">http://www.boostled.com/category_s/1833.htm</a>

I also believe someone is selling them on this site, but, they aren't ELN. They are LPF. Not sure if that helps or not. Her is the link.
[IMG]http://www.atlantareefclub.org/forums/showthread.php?t=77748">http://www.atlantareefclub.org/forums/showthread.php?t=77748</a>

Best of luck!!!
 
The ELN series are powered by 110V AC line.

The LPF series are powered by 48V DC, so you'd need an AC-DC power supply to power the driver.

Otherwise, they're the same.


The LPF are better if you need multiple separate drivers, they can be all powered by a single 48V DC supply for power - 48V 350 Watts, for example.

I would recommend the ELN series for this, though.
 
Sunny at Evergrow can get them for you. Shipping is a little high for just one. If you can order several the shipping per unit comes way down.
 
I can have a pile of them by the end of the week most likely if you guys really want them. Either MeanWell Or Inventronics
 
Softhammer;833936 wrote: I can have a pile of them by the end of the week most likely if you guys really want them. Either MeanWell Or Inventronics

does everybody want to do this?

can you tell us what the cost would be? for both brands please

Sewer Urchin 2
barry_keith 2
PFCDeitz 2
dabo 2
 
I may jump in. Depending on how much you'd charge me to ship to Montgomery, AL once you receive them. If this way is cheaper, than me ordering on my own, I'd support a group buy...
 
Miami Dolfan;833967 wrote: Count me in for 3 if the price is right. I have 5 units and need backups just in case.

Good, I will know who to look up if one of mine fails. hehehehe

Are these the electronic dimmable, mannual dimmable or non-dimmable?
 
What's up, Man?

I know they will be electronically dimmable drivers. Can be controlled by a neptunes apex, typhon controller, etc...

I believe you should be able to make them manually dimmable, but, haven't explored that option much...
 
rdnelson99;833993 wrote: Good, I will know who to look up if one of mine fails. hehehehe

Are these the electronic dimmable, mannual dimmable or non-dimmable?

I have 5 of the non dimmable
 
Back
Top