New setup taking it slow

[tpate77]

75 gallon DT
160 gallon Sump
What do i need to put in the third secton of my sump
Any help would be great Thanks hope the pictures come through I dont know if I am doing this right.

Edit: i guess it worked as you can see I have a DIY protien skimmer and working on my rock right now. I did the leds from rapid myself saving up to do the main led light setup. Let me know that you think and pointers if you see anything
<fieldset class="gc-fieldset">
<legend> Attached files </legend>

>

class="gc-images" title="1608.jpg[/IMG] style="max-width:300px" /></a>

>

class="gc-images" title="1609.jpg[/IMG] style="max-width:300px" /></a>

>

class="gc-images" title="1612.jpg[/IMG] style="max-width:300px" /></a> </fieldset>

 

[frantz]

A cover for your outlet! And I'd make sure that circuit has a GFCI on it as well. Even though it's not your primary power source I can see a bucket and pump getting used there. Might as well be careful.

I'm liking your setup though. Sump 2x DT! If you are doing a reef a good refugium is always great in a sump for nutrient removal as well as pod habitat.

 

[tpate77]

The outlet you speak of is in a room of my house i am still trying to finish myself. I will have a cover soon, i am also going to build a distrubution center for all electrical components over the sump on the peg board. The system is running fresh water at this time just to test plumbing. I have a few more things to purchase and wait on my diy rock to cure and have to build my 48 light kit from rapid led but that is down the road. Once the rock is cured i will start cycling my system, dont need lights for that. I am using diy rock and dry sand dont want harmful critters what would be the best way to start the cycle raw shrimp or what little help with that would be great

Edit: The outlet you speak of is in a room of my house i am still trying to finish myself. I will have a cover soon, i am also going to build a distrubution center for all electrical components over the sump on the peg board. The system is running fresh water at this time just to test plumbing. I have a few more things to purchase and wait on my diy rock to cure and have to build my 48 light kit from rapid led but that is down the road. Once the rock is cured i will start cycling my system, dont need lights for that. I am using diy rock and dry sand dont want harmful critters what would be the best way to start the cycle raw shrimp or what little help with that would be great

Edit: The outlet you speak of is in a room of my house i am still trying to finish myself. I will have a cover soon, i am also going to build a distrubution center for all electrical components over the sump on the peg board. The system is running fresh water at this time just to test plumbing. I have a few more things to purchase and wait on my diy rock to cure and have to build my 48 light kit from rapid led but that is down the road. Once the rock is cured i will start cycling my system, dont need lights for that. I am using diy rock and dry sand dont want harmful critters what would be the best way to start the cycle raw shrimp or what little help with that would be great

Edit: The outlet you speak of is in a room of my house i am still trying to finish myself. I will have a cover soon, i am also going to build a distrubution center for all electrical components over the sump on the peg board. The system is running fresh water at this time just to test plumbing. I have a few more things to purchase and wait on my diy rock to cure and have to build my 48 light kit from rapid led but that is down the road. Once the rock is cured i will start cycling my system, dont need lights for that. I am using diy rock and dry sand dont want harmful critters what would be the best way to start the cycle raw shrimp or what little help with that would be great

Edit: The outlet you speak of is in a room of my house i am still trying to finish myself. I will have a cover soon, i am also going to build a distrubution center for all electrical components over the sump on the peg board. The system is running fresh water at this time just to test plumbing. I have a few more things to purchase and wait on my diy rock to cure and have to build my 48 light kit from rapid led but that is down the road. Once the rock is cured i will start cycling my system, dont need lights for that. I am using diy rock and dry sand dont want harmful critters what would be the best way to start the cycle raw shrimp or what little help with that would be great