- Messages
- 178
- Reaction score
- 0
Hey guys, Ive been lurking and used several threads here to help finish up this project. Theres nothing new here, but my main goal was to make it as clean as possible and avoid having more cords running everywhere.
Inside there are two 12 volt relays, one that runs the ATO and another that runs a battery back up for a jeabo wp-10. The pump is running on 24 volts normally, but then will switch over to 12 volt out of the battery and runs for atleast 24 hours on the battery (I gave up testing it after 24 hours). The 12 volt transformer came out of a wall wart unit, I desoldered the original leads and worked it into mine.
I used standard connectors for everything to keep it plug and play, with various sizes to avoid frying it via plug mix ups.
alt="" />
alt="" />
alt="" />
alt="" />
Thanks to eveyone here for ll the help, even tho yall didnt know it
NGaHB
Inside there are two 12 volt relays, one that runs the ATO and another that runs a battery back up for a jeabo wp-10. The pump is running on 24 volts normally, but then will switch over to 12 volt out of the battery and runs for atleast 24 hours on the battery (I gave up testing it after 24 hours). The 12 volt transformer came out of a wall wart unit, I desoldered the original leads and worked it into mine.
I used standard connectors for everything to keep it plug and play, with various sizes to avoid frying it via plug mix ups.
Thanks to eveyone here for ll the help, even tho yall didnt know it
NGaHB
