RODI excess waste water

[brynbyers]

I've recently replaced the filters on my Typhoon unit but I'm still running into a similar problem with my unit. When running, the waste water line is running like a drinking fountain while the product water appears to be dripping at the right rate (75gpd). I've tried flushing the system, but it doesn't seem to help.
I don't have a booster on the unit, and when my reservior is filled, the float valve will stop the system so I don't think the ASOV is bad.

Any thoughts? I've emailed Air Water Ice and waiting on a response.

 

[porpoiseaquatics]

Your waste water line will run much faster than the purified water line. It's about a 7 to 1 ratio of waste water to purified water (7 gallons waste to 1 gallon purified). That number could be higher (as much as 10:1) depending on your incoming psi.

 

[lilrobb]

Check my thread with the almost identical title and see how I fixed it

 

[crewdawg1981]

porpoiseaquatics;603827 wrote: Your waste water line will run much faster than the purified water line. It's about a 7 to 1 ratio of waste water to purified water (7 gallons waste to 1 gallon purified). That number could be higher (as much as 10:1) depending on your incoming psi.

On a 75GPD unit the ratio should be more like 4:1?!