Solana 34 Build

[stoney1118]

I picked up a Solana last week! Theres not really much to build as far as the aquarium its self, the solana has the sump built in, But here we go!

 

[stoney1118]

Here is a list of the components I plan to use.


-Stock Solana return pump and skimmer
-Single LED fixture "Member Modded"
-Custom Closed loop to provide Adequate flow without any powerheads


Here are my plans for the closed loop. Your input is appreciated.


-custom closed loop located in the center chamber of the Solana's overflow/sump area. The center chamber houses filter media, carbon etc. I plan to install a 3/4" bulkhead for the intake, and use pvc, lock line, to create a split return. I will use a Mag 5 or similar submersible return pump, with a small ball valve to retard flow if necessary.

 

[merkywater]

Good to see ya back in John!

 

[stoney1118]

merkywater;742743 wrote: Good to see ya back in John!

It's great to be back Nate! Thanks!

 

[stoney1118]

alt="" />

alt="" />

alt="" />

alt="" />
Got the new Tile installed today thanks to my main man Jimmy! He's coming back to grout everything tomorrow while we're at the Meeting! Then I can move the Solana in!!

 

[stoney1118]

alt="" />

alt="" />
I have the Solana and all the components soaking in vinegar! It'll be clean and ready to set up tomorrow! FYI a friend of mine is housing all of my livestock until I'm ready to stock my Solana!

 

[izoid]

I just set my Solana up and I must say it is a great little tank, you will surely enjoy yours! I used an MP10 ES for flow instead of a closed loop and it seems to work well so far. Good luck with the setup.

 

[stoney1118]

izoid;742878 wrote: I just set my Solana up and I must say it is a great little tank, you will surely enjoy yours! I used an MP10 ES for flow instead of a closed loop and it seems to work well so far. Good luck with the setup.

Sweet! I considered a mp-10 but I'm upgrading to a 150 cube soon and it would be a bit small for a 150!

 

[stoney1118]

The room is back together and the tank is in place and perfectly level dry. I expect that to change, so I'm prepared to level it out after filling it up!

alt="" />

alt="" />

alt="" />

alt="" />

 

[stoney1118]

The closed loop is coming along nicely! The only thing left to do is install the return bulkhead and lock line fittings. Then I can test it out! I went with a maxi jet 1200 for now bc I had one laying around, but I designed the closed loop to work with a mag pump or similar.
Here's the intake bulkhead.

alt="" />
Here's the rest!

alt="" />

alt="" />

alt="" />

alt="" />