Yeah that's really scary...
FWIW, I never suggested that it's bad practice to keep a reef aquarium at 1.026. In the context in which the discussion began, I wondered if the death of a fish introduced to a tank with that SG, may have suffered osmotic shock *if* it came from a lower specific gravity.
In that instance, the hobbyist did not know the specific gravity that the fish came from - so if there's one good thing to come of that discussion, it would be a wise idea for people to check the SG of bag water versus their own water, and adjust their acclimation procedures accordingly if there's a gap either way (higher or lower).
I'd also submit that it's not good enough to ask the store or whatnot, what their SG is. Test it, and test one's own with the same tester. If 2 samples are tested with 2 different devices, there's also a possibility that one isn't calibrated the same as the other. So if 2 samples are tested with the same device (ie bag water and tank water), the individual will know if there's a difference and how much of a difference there is.
I keep my SG at 1.023-1.024 in reef systems, and 1.022-1.023 in FO systems.
The pre-made water I sell, I target 1.023-1.024.
Plenty keep it higher, like I said, I don't think that's a bad thing, IMO it's not an "exact science" and there is an acceptable range, not one precise number. Consistency is more important, IMO.
In my experience, many wholesalers keep their SG in the same range I do, so that makes it easier to acclimate new arrivals - less stress/changes for them.
Other sellers recommend similar ranges also...
http://www.fosterandsmithaquatics.com/pic/article.cfm?aid=1304">http://www.fosterandsmithaquatics.com/pic/article.cfm?aid=1304</a>
[IMG]http://www.aquabuys.com/c/nano-reef-aquarium.html">http://www.aquabuys.com/c/nano-reef-aquarium.html</a>
(Scroll down about 1/4 of the way down the page for the chart)
[IMG]http://kb.marinedepot.com/article.aspx?id=10252">http://kb.marinedepot.com/article.aspx?id=10252</a>
About 1/3 down the page:
[QUOTE=]By using a hydrometer or a refractometer you are able to find out how much salt is in the water. Ideally most saltwater tank will run best with a specific gravity of 1.020 to 1.025 or a specific gravity of 26-33 ppt with most keeping the specific gravity closer to the 1.025 range.[/QUOTE]
RHF acknowledges that reef aquaria can run just fine at 1.023, although his recommendation is higher at 1.026. He does seem to believe that people don't measure accurately though :-/
[IMG]http://reefkeeping.com/issues/2007-03/rhf/index.php#1">http://reefkeeping.com/issues/2007-03/rhf/index.php#1</a>
[QUOTE=]Fortunately, coral reef aquaria seem rather forgiving with respect to salinity. The range of salinities encountered in what most would proclaim as successful reef aquaria is actually quite large. Don’t agonize over small deviations from natural seawater. You will not notice any benefit changing from 36 or 34 ppt to 35 ppt (specific gravity = 1.0256 to 1.0271).[B] Many fine reef aquaria appear to run at salinity levels as low as 31 ppt (specific gravity = 1.023), but bear in mind that the values that aquarists report (as well as your own measurements) are fairly likely to be inaccurate, so pushing the low or high end of the range may not be prudent.[/B] [/QUOTE]
So while we might disagree with what "ideal" is, I think these examples demonstrate that there is a fair range of what is "acceptable".
Apparently the question has been going around for a while, I found this old poll from 2001 (RHF contributed to it also)...
[IMG]http://www.reefland.com/forum/reef-archives/4990-what-your-ideal-specific-gravity.html">http://www.reefland.com/forum/reef-archives/4990-what-your-ideal-specific-gravity.html</a>
While 1.025-1.026 got just over 53% of the votes, 1.023-1.024 came in second with just over 38% of the votes.
Jenn