<span style="font-family: Calibri;"><span style="font-size: 13px;">I can get a captive bred pair of either kudo or reidi which would you get and why? </span></span>
<span style="font-family: Calibri;"><span style="font-size: 13px;">The system is a 25 cube (18x18x18) with a 20g sump. I probably have about 10-15 lbs of live rock and about 10# of LS that came from my DT of 120g. I have another 20# of dead rock in the sump. I’m thinking of getting a off yellow fake center piece like a fan tree or something for hitching and some live red micro grass algae for in the tank. want someting live but was tld that the SH would mess with it where thy hitched. </span></span>
<span style="font-family: Calibri;"><span style="font-size: 13px;">I have a mag 9.5 feeding the chiller and it is set on 76* ATM. the flow through the chiller and then to the tank is not a lot. maybe 150 to 300gpd. I need to check it today. I could tee off the pump and then feed both chiller and tank as the chiller hole is small say 3/8" to 7/16". </span></span>
<span style="font-family: Calibri;"><span style="font-size: 13px;">I bought an mp10 for the tank but I think it would be too much flow, what do you think? I have a small nano ph in it ATM</span></span>
<span style="font-family: Calibri;"><span style="font-size: 13px;">The system is a 25 cube (18x18x18) with a 20g sump. I probably have about 10-15 lbs of live rock and about 10# of LS that came from my DT of 120g. I have another 20# of dead rock in the sump. I’m thinking of getting a off yellow fake center piece like a fan tree or something for hitching and some live red micro grass algae for in the tank. want someting live but was tld that the SH would mess with it where thy hitched. </span></span>
<span style="font-family: Calibri;"><span style="font-size: 13px;">I have a mag 9.5 feeding the chiller and it is set on 76* ATM. the flow through the chiller and then to the tank is not a lot. maybe 150 to 300gpd. I need to check it today. I could tee off the pump and then feed both chiller and tank as the chiller hole is small say 3/8" to 7/16". </span></span>
<span style="font-family: Calibri;"><span style="font-size: 13px;">I bought an mp10 for the tank but I think it would be too much flow, what do you think? I have a small nano ph in it ATM</span></span>
