Best PH Controller/Monitor

[james s_]

Acroholic;404015 wrote: I had the older style, same tube as the new Nilsen small, with a mini jet built into the top, but the mini jet stopped working, so Tim put on a new acrylic top, and retrofitted one of the Blueline pumps. So imagine one of the new Nilsens without the timer top. I use a receptacle type digital timer that the Blueline plugs into.

I like the way it works. The little pump is cool.
Dave

Sweet! Im looking forward to buying mine...I think Im going to buy the standard Nilsen, since the large one is quite a bit more $$$ and holds the same amount of kalk..according to their site.

Well I found a good deal on a Pinpoint Controller on RC, so now I just need to buy some calibration fluids and get my reactor..

 

[james s_]

grouper therapy;403997 wrote: I hope this makes sense to you James not sure why the words solenoid valves did not show up but they would be next to the word two in the drawing

Thanks so much for taking the time to make that....you have any links to the solenoid valves your using? I'm thinking about using a dual float switch setup which I already have from autotopoff.com to control my aqualifter. Im thinking that would be very similar to what you are using..

 

[grouper therapy]

Dave(acroholic) How much water does your ato pump into the sump at each top off event?

 

[acroholic]

grouper therapy;404566 wrote: Dave(acroholic) How much water does your ato pump into the sump at each top off event?

I'd say it adds about 30 ml each time it comes on. The Osmolator is really accurate because of the infrared eye the unit uses. I have very little fluctuation in water level in my sump, and my sump flows pretty fast with a decent amount of water turbulence.

 

[grouper therapy]

James S.;404565 wrote: Thanks so much for taking the time to make that....you have any links to the solenoid valves your using? I'm thinking about using a dual float switch setup which I already have from autotopoff.com to control my aqualifter. Im thinking that would be very similar to what you are using..

No problem. I use the ones on the link you posted autotopoff.com