Group buy Frag tank Build

kullas

kullas

Well-Known Member
Market
Messages
783
Reaction score
784
Location
Ellijay
Anyone that got a frag tank in the group buy is welcome to post there build here. I will be building mine here.
A big thanks to @aestheticlibra for the stand and @tonytran509 the acrylic sheeting and @Steve Burton for the acrylic solvent.
Here is a pic of the stand and the aio filter system I'm working on. So far welding the acrylic is going nice20200327_144317.jpg20200404_171425.jpg
 
Thanks bro, I just haven't had time yet. Ironically, we've been busier than normal for this time of year...not complaining.
I'm going AIO. What're the dimensions of your acrylic pieces? Did you end up going the full 8"?
 
Rainblood said:
Thanks bro, I just haven't had time yet. Ironically, we've been busier than normal for this time of year...not complaining.
I'm going AIO. What're the dimensions of your acrylic pieces? Did you end up going the full 8"?
Click to expand...
Yep 8" . The front panel is 23"x 8¹/²" and 3 baffles 8"x7¹/⁴". First chamber is 8"x8" for skimmer and heater. Filter section is 8"x3¹/²" flows under baffle to a chamber 8"x5¹/²" over that baffle into the return pump.
 
Hey the second partition needs to be about 1 1/2" shorter to allow for overflow of the prefilter chamber. If that chamber clogs, the water will spillover the front and side and possibly starve the return pump.

Otherwise looks real good!
 
dball711 said:
Hey the second partition needs to be about 1 1/2" shorter to allow for overflow of the prefilter chamber. If that chamber clogs, the water will spillover the front and side and possibly starve the return pump.

Otherwise looks real good!
Click to expand...
Didn't think about that :) probably have to drill holes on the 2nt partition to allow for emergency flow being the acrylic is already welded.
 
I hate to be Debbi Downer but just a heads up...

the top of the false wall should be just under the li- of the aquarium frame, almost touching (touching is ok). Tank water level will be about 3/8” above the top of the wall of the 1st chamber meaning when running properly your tank water level will be about 1” below the black rim/trim of the tank. Here’s a picture of mine to give you an idea of what I’m talking about.

IMG_3616.JPGIMG_3614.JPG
 
dball711 said:
I hate to be Debbi Downer but just a heads up...

the top of the false wall should be just under the li- of the aquarium frame, almost touching (touching is ok). Tank water level will be about 3/8” above the top of the wall of the 1st chamber meaning when running properly your tank water level will be about 1” below the black rim/trim of the tank. Here’s a picture of mine to give you an idea of what I’m talking about.

View attachment 21353View attachment 21354
Click to expand...
So far the faults wall is 3/16 from the top lip of the tank. The 1st chamber is just a little under the lower section of the weir. (I added a cut out for emergency overflow just incase the filter clogs). The one thing I did notice is the baffle that sections off the return chamber was the same height as the first baffle giving me the same water level across the entire thing. To fix that I added a 1" drop cutout giving me a step down in water.
 
You must log in or register to reply here.

Similar threads

Reefplumber13
My dream tank build...
Replies
13
Views
676
Reefplumber13
Reefplumber13
GratefulAlpaca
RedSea xl 425 Build (slightly modified)
Replies
6
Views
414
GratefulAlpaca
GratefulAlpaca
T
40g breeder AIO tank setup
Replies
5
Views
565
TheEuroMeister
T
Hunna
40b AIO
2
Replies
27
Views
794
Hunna
Hunna
Adam
Orphek Natura iCon - GROUP BUY!!!
Replies
2
Views
229
Mick
M
Back
Top