Ok, To raise my mag to 1800ppm.Total volume 205 gal.Want to raise 100ppm aday.The calculator tells me about 37 oz aday.Until i reach my goal.Just seems like alot.Anyone want to check my math.
I try not to add it all at once and break it up into at least morning and night. It does impact alk and Ca some keep on eye on those if you have some harder to keep SPS.
Thanks, Jeff,I will look at those.I thought i did enough research. but i didnt.This is my last ditch effort to get rid of this junk.This has been the worst thing that has been in my tank since i been in the hobby
Start at 1600 but it honestly shouldn't hurt anything at 1800. I started with 1600 for 2 weeks and still noticed some so I moved up slowly to 1800 and held it there for another 2 weeks and it all died. Haven't had it again and it's been almost 2 years...
i didnt and would not recommend running carbon or gfo...its the "impurities" so to speak that are in tech m which have the effect on bryopsis and running either may strip the water of them and rendering it less effective
Fishlips;971833 wrote: I never used gfo before this problem. This is first time in 8 yrs i ever had HA.It came in on a frag.Didnt think anything of it.
Well , here we go.Adding 9.4 oz of teck-m, 4 x a day till I reach 1600 to 1700. ppm.Will hold that for two weeks and see what happens.Anyone know if I will see die in the first couple of days.