Who has a 2nd Membrane on their RO/DI unit?

[porpoiseaquatics]

I'm polling to see who has one and which one you have. Provide links, if possible, to where you acquired yours. I'm looking to add one to mine.

 

[hiimsean]

I have a BRS kit with the booster pump. I had pretty low pressure before so adding both was like night and day. Keep in mind that you need to keep your water pressure at at-least 65PSI.

http://www.bulkreefsupply.com/brs-150-gpd-water-saver-upgrade-kit.html">http://www.bulkreefsupply.com/brs-150-gpd-water-saver-upgrade-kit.html</a>
[IMG]http://www.bulkreefsupply.com/1-4-aquatec-8800-booster-pump-kit-1.html">http://www.bulkreefsupply.com/1-4-aquatec-8800-booster-pump-kit-1.html</a>

 

[oz]

 

[jrhunter0000]

I do came with my setup but i think it was bought at spectra pure.

 

[drydock]

I have same setup as Sean. BRS second membrane plus booster pump.

 

[joseayes]

Ice water and ice. I had linked separately, each with its own waste line. But I think you can do water savings if connected in serie.

alt="" />

 

[mcphock]

I do too. Got mine from BRS.

 

[porpoiseaquatics]

I won't need a booster as I have at least 80 psi at the tap where my RO/DI is connected. The rest of the house is regulated down a little so that I don't blow hoses like to the dishwasher or refrig.

 

[mcphock]

Funny you should mention that. I have to run my faucet at about 25% just to get 80PSI. I bet I could easily get...200?

 

[acroholic]

McPhock;987687 wrote: I do too. Got mine from BRS.

Same here.

 

[raz0945]

I have a BRS kit.

 

[porpoiseaquatics]

McPhock;987698 wrote: Funny you should mention that. I have to run my faucet at about 25% just to get 80PSI. I bet I could easily get...200?

WOW!! You might want to have that checked. Most hoses can't take above 110 psi.

 

[mcphock]

barry_keith;987712 wrote: That's too high, sounds like your pressure regulator has gone bad. It can cause issue with faucets and other plumbing fixtures

I don't know what that is. It's been doing this for about a year?

 

[porpoiseaquatics]

McPhock;987720 wrote: I don't know what that is. It's been doing this for about a year?

Somewhere on your incoming water line there is a pressure regulator or sometimes referred to as a pressure reducer.

 

[mcphock]

At my water main, I have a valve I can turn with a wrench. Turning it 90 degrees shuts off water to the house. Maybe I should turn it 30 degrees?

 

[y-not]

McPhock;987724 wrote: At my water main, I have a valve I can turn with a wrench. Turning it 90 degrees shuts off water to the house. Maybe I should turn it 30 degrees?

That's not it!!

You need to get this checked ASAP.
Water heaters are way dangerous and it your water heater is more than a few years old, it's a time bomb waiting to go off with that sort or pressure.

GET IT CHECKED!

 

[jead85]

order the add on kit from AWI for $25 and they have a $10 off coupon... membrane from amazon
or.. order the whole setup from AWI and the whole setup is $60 shipped. $10 less than BRS

 

[mcphock]

Y-Not;987726 wrote: That's not it!!

You need to get this checked ASAP.
Water heaters are way dangerous and it your water heater is more than a few years old, it's a time bomb waiting to go off with that sort or pressure.

GET IT CHECKED!

Plumber I guess? Anyone have any good, fair recommendations?

 

[ralph atl]

McPhock;987687 wrote: I do too. Got mine from BRS.

Acroholic;987699 wrote: Same here.

same here

 

[jead85]

I actually own a typhoon III and a BRS RODI with a pump. I like the restrictor on the typhoon better, it has the fast flush built in. My father and I have both dealt with them on several occasions. GREAT SERVICE!