Will a 1/4 HP chiller work on my tank?

KrisDeitz

Well-Known Member
Market
Messages
1,914
Reaction score
148
Location
Statham
bumping this for Info Would this be ok to run on my small system?

showthread.php
 
Skriz;672534 wrote: Since you already have it, and unless there's a space issue with using it, you should use it. It will use less power overall than a smaller chiller. It will use more while running, but it will run for a shorter period of time. Hope this makes sense.

...........
 
Sharkbait;672824 wrote: ...........

Still not what i asked....

Thanks for the .02

Im told this chiller will Over due my tank.. Sorta like putting a 500w heater in a 10 gallon tank
 
How do you not understand what Skirz said? It isn't the same for chillers as it is for heaters....I'm sure someone who works in the hobby and works for a high end manufacture as himself would not tell you to run a chiller that wouldn't be right for your tank...
 
That chiller may require more flow to be effective, which may turn his tank into a whirlpool depending how it was plumbed.
 
Sharkbait;672838 wrote: How do you not understand what Skirz said? It isn't the same for chillers as it is for heaters....I'm sure someone who works in the hobby and works for a high end manufacture as himself would not tell you to run a chiller that wouldn't be right for your tank...

i understand what he is saying guy.. But if for some reason i have a power outage and my tank raises or drops 5 Degrees and then i get power that chiller will raise the temp to fast.... So it works just like a heater... Thats how i lost my livestock in my smaller tank.. Someone said a 300w heater would be fine. power out for a hour and it was cold. power on it raised the tank so fast it cracked and killed everything. This chiller is Rated for 170 gallons which it can do a +- 10 Deg


On 100g its 20-+
 
PFCDeitz;672842 wrote: i understand what he is saying guy.. But if for some reason i have a power outage and my tank raises or drops 5 Degrees and then i get power that chiller will raise the temp to fast.... So it works just like a heater... Thats how i lost my livestock in my smaller tank.. Someone said a 300w heater would be fine. power out for a hour and it was cold. power on it raised the tank so fast it cracked and killed everything. This chiller is Rated for 170 gallons which it can do a +- 10 Deg


On 100g its 20-+

A chiller will not raise your temperature...
 
Unless a chiller fails, which is rare but does happen. The chiller will turn off when it reaches the temp that you program it too. I had a 1/4 on my solana 34g system and never once had a problem. It never chilled the water too low or raised the heat as you are suggesting.

Edit:
PFCDeitz;672844 wrote: :deadhorse:Thanks anyways

Why ask for information if you do not wish to hear the response? Are you wanting to hear exactly what you want or are you truly seeking the real answer to your question?
 
Sharkbait;672845 wrote: Unless a chiller fails, which is rare but does happen. The chiller will turn off when it reaches the temp that you program it too. I had a 1/4 on my solana 34g system and never once had a problem. It never chilled the water too low or raised the heat as you are suggesting.

Edit:

Why ask for information if you do not wish to hear the response? Are you wanting to hear exactly what you want or are you truly seeking the real answer to your question?


Because you dont understand my question and continue to just provide the wrong info
 
Sharkbait;672845 wrote: Unless a chiller fails, which is rare but does happen. The chiller will turn off when it reaches the temp that you program it too. I had a 1/4 on my solana 34g system and never once had a problem. It never chilled the water too low or raised the heat as you are suggesting.

Edit:

Why ask for information if you do not wish to hear the response? Are you wanting to hear exactly what you want or are you truly seeking the real answer to your question?

He didn't say it would raise the temp over what it is set at... It will raise it too fast. Read what he wrote...
 
GAreefer;672879 wrote: He didn't say it would raise the temp over what it is set at... It will raise it too fast. Read what he wrote...

How does a chiller raise temp in a tank....the whole point behind a chiller is to lower the temp...
 
Sharkbait;672884 wrote: How does a chiller raise temp in a tank....the whole point behind a chiller is to lower the temp...

Sorry I meant lower... I was just saying you should of read what he wrote before you posted... He doesn't want the temp to change to fast

Hope you can find a chiller Deitz!!!
 
PFCDeitz;672842 wrote: i understand what he is saying guy.. But if for some reason i have a power outage and my tank raises or drops 5 Degrees and then i get power that chiller will raise the temp to fast.... So it works just like a heater... Thats how i lost my livestock in my smaller tank.. Someone said a 300w heater would be fine. power out for a hour and it was cold. power on it raised the tank so fast it cracked and killed everything. This chiller is Rated for 170 gallons which it can do a +- 10 Deg


On 100g its 20-+

I read it just fine....
 
PFCDeitz;672915 wrote: Read the line before that. Meant to say raise or drop again.

Most chillers have a built in thermostat and controller. With the controller you set the desired temp that you would allow the tank to always be at. After that most controllers only allow 2-3 degrees of swing. Mine is 2 degrees. This is for the very reason you fear. It wont allow the temp to get too high then chill it down very low either. This way you won't kill anything. At least this is how my chiller and most new age chillers are. You can also get a ranco heater temp controller and set it that way as well and be sure you won't kill anything.
 
Sharkbait;672924 wrote: Most chillers have a built in thermostat and controller. With the controller you set the desired temp that you would allow the tank to always be at. After that most controllers only allow 2-3 degrees of swing. Mine is 2 degrees. This is for the very reason you fear. It wont allow the temp to get too high then chill it down very low either. This way you won't kill anything. At least this is how my chiller and most new age chillers are. You can also get a ranco heater temp controller and set it that way as well and be sure you won't kill anything.

That's the answer I wanted ! Thanks
 
Sharkbait;672924 wrote: ranco heater temp controller and set it that way as well and be sure you won't kill anything.
Make sure it has a set ramp rate. I don't know if Ranco have that or not. I think it's just a set point.
 
Back
Top